How to reset an iPod

Steps to easily reset iPod Shuffle

1. Disconnect from iTunes and slide the iPod Power button to the “off” position.

2. Now the green strip of your device is behind the button and you are ready to start the troubleshooting procedure.

3. Wait for five seconds after you have turned it off.

4. Turn back the device on with the slider button being on the left of the device so that the green strip is visible now.

5. This will unfreeze your device.

If you still have problems, repeat the same steps again.

Steps to easily reset iPod Nano

1. The hold switch should be slide on and off.

2. You need to make sure that it is put on hold for a moment and then again you have un-hold it.

3. Now this is a very important step. You need to simultaneously press the menu and the select buttons.

4. Now hold it for at least 10 seconds. You should now see an Apple logo appearing which means that your iPod Nano has been reset.

Steps to easily reset iPod Classic

1. You need to hold the slide switch and turn it on and off.

2. You need to slide the slider to the hold position such that the orange stripe is visible and then you need to revert it back to the original position.

3. Now you need to press the Menu button and the select button simultaneously (First button is located at the top of the device and the other button could be found at the volume wheel)

4. This is the final step in which you need to hold them for at least ten seconds after which you should see the Apple logo appearing in your device.

Steps to easily reset iPod Touch

1. Locate the sleep / wake button which is located at the top of the device.

2. Now this button is used for making your device go to sleep mode or the wake up mode.

3. You need to press this button and the home button simultaneously.

4. This needs some patience and you might have to wait more than ten seconds to see the Apple logo appearing in the screen.

5. Now connect your device to the computer. If the device is unable to reconnect, repeat the above steps again.

How to avoid your device from crashing and freezing:

1. Always make sure that your battery is fully charged.
2. If you have a low battery, don’t drain the complete power. Switch it off and recharge again and then play your music.
3. Never use any third party applications to transfer songs and videos to your iPod device. These may harm your firmware version and this can easily led to the crashing of your iPod product.
4. Always use the official program for connecting iPod to your PC or MAC. You can download it from the official store via this link.
5. Always leave some space in your device. Do not use 100 percent of your drive space while transferring media. This will ease the system capability to render all songs flawlessly.
6. Always scan your computer for viruses and malware before connecting you iPod. Your system can deal with such things but your iPod cannot. A virus or a Trojan in iPod can create problems leading to the crash of your device.

Restore iPod to Factory Settings

The customer support of the Apple makes it a very reliable brand in the market. The facilities that they provide to the users are beyond comparison to other competitors. The official website provide complete helping trick to troubleshoot this problem. We here will just try to make is easier for you.

Follow these simple steps to troubleshoot online and make a hard reset –

1. Check you have properly connected your system to the internet.
2. Start your iTunes and check for updates availability for your iPod version.
3. Download and update (if available, else skip to step 4)
4. Open iTunes and connect your device to the computer using either the USB cable or the fire wire cable whichever came with your device.
5. Now after a few seconds your iPod will be visible in the Source panel of the iTunes.
6. Clicks restore.
7. For Mac Users you might have to provide the admin username and password after the prompt.
8. Now a progress bar will be visible which will guide you through the progress status and every stage it completes.
9. You might be shown any of the two messages below after the resetting process is complete:
   Disconnect iPod and connect it to iPod Power Adapter (0lder models)
   Leave iPod connected to computer to complete restore (Newer Models)
10. Please make sure that during any of the previous stages that the device does not disconnects from the system.
11. After all steps are completely carried out you will be asked to enter the name for your iPod device and might also ask for your synching preferences. Fill in the information and now your iPod has been reverted back to factory settings.

If you are still having any problems with your device, post back in the comment section. I will try my best to provide solution as early as possible.

The device helps one to recover deleted contact details and mapping solutions. Company officials believe that the gadget is quite helpful for those who suspect foul play in their organization or personal life by their partner. It will also be helpful for detective agencies to recover data from the phone of the suspect.

Working of iRecovery Stick

In order to utilize the device, all users need to do is to connect the USB device to the computer and then connect it to the iPhone. After the devices have been connected, the software inside the USB device recovers the deleted data of the iPhone. The device can be snapped for 199 pounds.